Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs of the Geely Ck Rear Headlight

Model: Geely Ck MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

Video tutorial

In this short and simple guide, follow the main instructions to remove and replace the bulbs of the rear headlight of the Geely Ck. First, open the rear hatch of the trunk and start unscrewing the fastening screws of the light assembly, then disconnect the electrical connector of the bulbs.

Next, remove the bulbs along with the socket to replace them with new ones (of the correct type), as shown in the video.

Finally, reassemble the rear light, following the video tutorial to the end!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Geely CK
How to Replace the Starter Motor on a Geely CK
Geely Ck (2005-2016 / MK 1) To replace the starter motor on a Geely CK, open the hood to access the components in the engine bay: the starter motor is located at the rear of the…
How to Replace the Cabin Fan of the Geely CK
How to Replace the Cabin Fan of the Geely CK
Geely Ck (2005-2016 / MK 1) This guide outlines the main steps to remove and replace the cabin fan of the Geely CK. First, get inside the vehicle on the front passenger side and…
Removing the Front Door Panel of the Geely CK
Removing the Front Door Panel of the Geely CK
Geely Ck (2005-2016 / MK 1) Follow this guide for instructions to remove and replace the front door panel of the Geely CK. First, open the front door and start removing the vari…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos