Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Geely CK

Model: Geely Ck MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Starter motor

Video tutorial

To replace the starter motor on a Geely CK, open the hood to access the components in the engine bay: the starter motor is located at the rear of the engine block. To remove it, loosen the screws that secure it to the mounts and disconnect the connectors attached to the device.

Once the part is free, remove it from its housing and replace it with a new one. Secure and connect the new starter motor, then close the hood.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Replacing the Coolant in the Geely Ck
Replacing the Coolant in the Geely Ck
Geely Ck (2005-2016 / MK 1) Follow the procedure below to replace the coolant in the Geely Ck. First, move to the front of the vehicle and start by loosening the coolant drain p…
How to Replace the Cabin Fan of the Geely CK
How to Replace the Cabin Fan of the Geely CK
Geely Ck (2005-2016 / MK 1) This guide outlines the main steps to remove and replace the cabin fan of the Geely CK. First, get inside the vehicle on the front passenger side and…
How to Replace the Timing Belt on a Geely CK
How to Replace the Timing Belt on a Geely CK
Geely Ck (2005-2016 / MK 1) Today, you will see the main instructions that will allow you to remove and replace the timing belt on a Geely CK. First, open the hood and start dis…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos