Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Genesis Gv70 - Key

Genesis Gv70 (2020-2024 / MK 1)
How to replace the battery of the Genesis GV70 remote control.
In this video, we see how to replace the battery of the Genesis GV70: it uses a common CR2032 button battery, which we can easily find in any supermarket. We …read all…
Posted on 26 January 2024 by ScegliAuto
Genesis Gv70 (2020-2024 / MK 1)
How to activate the fingerprint recognition system on the Genesis GV70
On the Genesis GV 70 the technology has gone beyond what is usual on other cars. Fingerprint recognition is used to drive off in this car. Let's see how to …read all…
Posted on 8 December 2022 by ScegliAuto
Battery (1) Gearbox (1) Key (2) -board computer (1) Checks and maintenance (4) Engine oil (2) Door panel (1) Fuse box (1) Seat (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos