Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to disassemble the engine of the Gilera Runner 50, you need to loosen the screws that fix the block to its housing: in this way it will be possible to proceed by removing the intake and exhaust pipes and then disconnecting the connectors attached to it. At this point, it will be possible to proceed by loosening the screws that fix the cylinder, removing it from its upper part and disconnecting the piston from the corresponding connecting rod: in this way it will be possible to remove the connecting rod from its seat and access the components in the lower part of the engine, eventually replacing them.

Posted on 25 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Coolant on a Gilera Runner 50
Replacing the Coolant on a Gilera Runner 50
Runner 50 Let's see how to replace the engine coolant on a Gilera Runner 50. Position the scooter on its central stand, remove the metal clips from the radiato…
Replacing the Fuel Tank Float on a Gilera Runner 50
Replacing the Fuel Tank Float on a Gilera Runner 50
Runner 50 This guide outlines the main steps to remove and replace the fuel tank float on a Gilera Runner 50 scooter. First, place the scooter on the centre st…
How to Perform Periodic Maintenance on a Gilera Runner 50
How to Perform Periodic Maintenance on a Gilera Runner 50
Runner 50 In this brief guide, you will learn how to perform periodic maintenance on your Gilera Runner 50 scooter by changing the engine oil, replacing the dr…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos