Do it yourself
| ||||
|
Model: Gilera Runner 50
In this short guide we will see how to carry out periodic maintenance on our Gilera Runner 50 scooter, replacing the engine oil, the transmission belt and overhauling the various gearbox components. First we position the central stand on our scooter and start by unscrewing the oil vent bolt that we find under the engine; then remove the transmission side casing by unscrewing the side screws. At this point we drain the gearbox oil; then we remove the fan and the clutch bell, unscrewing the main nuts. Let's remove the belt and the variator now!
Posted on 21 June 2022 by ScegliAuto
|
How to remove and replace the front wheel of the Honda Nc 750XToday we will see, in this short and simple guide, how to disassemble and replace the front wheel of the Honda Nc 750X motorcycle. First of all we put our bike on the central stand and we start to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; let's then loosen the central pin of the wheel, using a socket wrench, as shown in the video. At this point we lift the wheel from the ground with a jack or front stand; remove the pin and replace the wheel, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |