Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Runner Fxr 180
In order to replace the headlight bulb of the Gilera Runner FXR 180, you need to loosen the screw that secures the front panel of the motorcycle so that it can be removed: the screw underneath that secures the headlight from above and the two screws that secure the headlight from below will then need to be loosened. This way, the headlight unit can be removed and disconnected to remove the bulb inside: now you can place the new one so that it is properly connected and secured, making sure everything works correctly.

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorber on a Gilera Runner FXR 180
How to Replace the Rear Shock Absorber on a Gilera Runner FXR 180
Runner Fxr 180 You can replace the rear shock absorber on a Gilera Runner FXR 180 by loosening the screws that secure it to its housing: these will be located at th…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos