|
Do it yourself
| |||
| ||||
Model: Gilera B 300
To disassemble the engine of the Gilera B 300, you need to loosen the screws that secure the engine block to its housing, located in the center of the frame. You will also need to disconnect the power cables and loosen all the screws that secure the intake and exhaust manifolds. Then, it will be possible to loosen the screws that hold the cylinder and the cylinder head, allowing you to access the piston inside. The piston can be detached from the connecting rod by widening the ring and removing the pin. You will now have access to the crankshaft and all the additional components that need to be replaced.
Posted on 22 December 2025 by ScegliAuto
Video tutorial
Related tutorials
B 300
In order to replace the headlight bulb of the Gilera B 300, you need to loosen the screws that fix the headlight assembly to its housing: these screw…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |