Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a Gilera Runner 50

Model: Gilera Runner 50
Part: Engine oil

Video tutorial

Changing the engine oil on a Gilera Runner 50? Follow this guide to proceed with the replacement. Position the scooter on its original stand, and using a socket wrench, unscrew the bolt from the oil sump (drain the fluid into a container).

Unscrew the securing screws of the container cap where the oil filter is located (if it needs replacing). Remove the plastic cap and top up the new fluid in the engine (use a funnel).

Check the oil level with the dipstick located under the cap and close with the plastic cap after topping up.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Replacing the Coolant on a Gilera Runner 50
Replacing the Coolant on a Gilera Runner 50
Runner 50 Let's see how to replace the engine coolant on a Gilera Runner 50. Position the scooter on its central stand, remove the metal clips from the radiato…
Change the Oil of the Gilera Runner 50 Gearbox
Change the Oil of the Gilera Runner 50 Gearbox
Runner 50 This guide provides instructions on how to change the transmission oil of the Gilera Runner 50 two-stroke scooter. First, place your scooter on the c…
How do you disassemble the engine of the Gilera Runner 50?
How do you disassemble the engine of the Gilera Runner 50?
Runner 50 In order to disassemble the engine of the Gilera Runner 50, you need to loosen the screws that fix the block to its housing: in this way it will be p…

How to Replace the Starter Motor on a Derbi Senda 125?

To replace the starter motor on a Derbi Senda 125, you need to unscrew the bolts securing the cover located on the right side of the bike, under which the clutch is also found. Once the cover is removed, you will locate the starter motor at the top left relative to the clutch. By unscrewing the nuts that secure it in place, you can free it from its housing to insert a new replacement part. After the replacement, reattach the cover, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos