Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Oil Filter on Gilera Runner Vxr 200

Model: Gilera Runner Vxr 200
Part: Engine oil

Video tutorial

Today's instructions will show you how to perform routine maintenance by changing the engine oil and oil filter on the Gilera Runner Vxr 200 scooter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter using the appropriate tool, replacing the cartridge with a new one as shown in the video.

At this point, unscrew the filler screw to top up with new engine oil, pouring in the correct amount.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Gilera Runner VXR 200?
How do you replace the motor oil of the Gilera Runner VXR 200?
Runner Vxr 200 In order to replace the engine oil of the Gilera Runner VXR 200, you must loosen the drain plug located on the bottom of the vehicle: once this plug …
How to Change the Engine Oil on a Gilera Runner VXR 200?
How to Change the Engine Oil on a Gilera Runner VXR 200?
Runner Vxr 200 You can change the engine oil on a Gilera Runner VXR 200 by loosening the drain plug of the oil sump located at the central lower part of the vehicle…
How to change the engine oil on the Gilera Runner VXR 200?
How to change the engine oil on the Gilera Runner VXR 200?
Runner Vxr 200 You can perform the engine oil change on the Gilera Runner VXR 200 by loosening the drain plug located at the central lower part of the bike: once th…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos