Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the engine oil of the Gilera Runner VXR 200, you must loosen the drain plug located on the bottom of the vehicle: once this plug has been loosened, you can drain the used oil into a properly positioned container. Then you can also remove the oil filter located near the stand, replacing it with a new spare part; after the replacement, you can top up the oil by inserting the necessary amount through the vent on the left side.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on the Gilera Runner VXR 200?
How to change the engine oil on the Gilera Runner VXR 200?
Runner Vxr 200 You can perform the engine oil change on the Gilera Runner VXR 200 by loosening the drain plug located at the central lower part of the bike: once th…
How to Change Engine Oil and Oil Filter on Gilera Runner Vxr 200
How to Change Engine Oil and Oil Filter on Gilera Runner Vxr 200
Runner Vxr 200 Today's instructions will show you how to perform routine maintenance by changing the engine oil and oil filter on the Gilera Runner Vxr 200 scooter.…
How to Change the Engine Oil on a Gilera Runner VXR 200?
How to Change the Engine Oil on a Gilera Runner VXR 200?
Runner Vxr 200 You can change the engine oil on a Gilera Runner VXR 200 by loosening the drain plug of the oil sump located at the central lower part of the vehicle…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos