Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Typhon : Variator block removal on Gilera Typhon

Model: Gilera Typhon
Part:
Variator block removal on Gilera Typhon

We open the compartment under the saddle, unscrew the screws of the bacteria and remove it, then remove the entire saddle and under-saddle compartment. In this way you can reach the carburetor noting the choke that blocks the flow. This choke must be removed simply by making it jump from its seat. Remember to grease the carburetor before reassembling everything. Remove the variator casing and unscrew the central bolt of the plate. Keep the washer relative to the nut aside, remove the plate and then the half-pulley. At this point you can remove the block, reassemble the half-pulley and the plate, screw the nut and close everything.


Posted on 6 January 2024 by ScegliAuto

This video is currently unavailable

How to remove the seat and the helmet compartment of the Peugeot Speedfight 2

We are going to illustrate below the main instructions that will allow us to disassemble and replace the seat and the helmet compartment of the Peugeot Speedfight 2 scooter. First of all we put our scooter on the central stand and begin to unscrew the fixing screws that we find on the sides of the compartment. helmet holder; we then unscrew the seat screws to remove it, as shown in the video. At this point we unscrew the petrol cap and remove the lateral plastic parts of the compartment, thus accessing the upper part of the engine; then let's reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos