Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will see how to carry out a full maintenance service, including an oil change and oil filter replacement, transmission belt, and spark plug, on a Gilera Runner VXR 200 scooter. First, position your scooter on the centre stand and unscrew the oil drain bolt located under the engine; unscrew the oil filter bolt to remove it, replacing it with the new one. Now proceed to remove the air filter box and clutch cover, taking off the variator and fan; then replace the belt and reassemble everything, following the video to the end!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on the Gilera Runner VXR 200?
How to change the engine oil on the Gilera Runner VXR 200?
Runner Vxr 200 You can perform the engine oil change on the Gilera Runner VXR 200 by loosening the drain plug located at the central lower part of the bike: once th…
How do you replace the motor oil of the Gilera Runner VXR 200?
How do you replace the motor oil of the Gilera Runner VXR 200?
Runner Vxr 200 In order to replace the engine oil of the Gilera Runner VXR 200, you must loosen the drain plug located on the bottom of the vehicle: once this plug …
How to Replace the Belt on the Gilera Runner VXR 200?
How to Replace the Belt on the Gilera Runner VXR 200?
Runner Vxr 200 To replace the drive belt on the Gilera Runner VXR 200, first loosen the bolts securing the cover of the casing located near the rear wheel on the le…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos