|
Do it yourself
| |||
| ||||
|
Model: Gilera Runner Vxr 200
To replace the belt on the Gilera Runner VXR 200, loosen the bolts securing the cover of the casing located near the rear wheel on the left side. Once the casing cover is removed, you can access the underlying components by loosening the central pin of the variator and the clutch bell. After removing these two components, slide off the belt that is around them and replace it with a new spare part; after the replacement, refit the cover.
Updated on 17 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Runner Vxr 200
To replace the drive belt on the Gilera Runner VXR 200, first loosen the bolts securing the cover of the casing located near the rear wheel on the le…
Runner Vxr 200
To replace the side fairing of the Gilera Runner VXR 200, lift the seat to access the under-seat compartment: inside, you will find the screws that s…
Runner Vxr 200
In order to replace the engine oil of the Gilera Runner VXR 200, you must loosen the drain plug located on the bottom of the vehicle: once this plug …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
