Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Runner Vxr 200
Part:

To replace the drive belt on the Gilera Runner VXR 200, first loosen the bolts securing the cover of the casing located near the rear wheel on the left side. Once the casing cover is removed, you can access the underlying components by loosening the central pin of the variator and the clutch bell. By removing these two components, you can slide off the belt that is positioned around them and replace it with a new spare part; after replacement, reinstall the disassembled parts.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on a Gilera Runner VXR 200
How to Replace the Belt on a Gilera Runner VXR 200
Runner Vxr 200 To replace the belt on the Gilera Runner VXR 200, loosen the bolts securing the cover of the casing located near the rear wheel on the left side. Onc…
How to Perform a Full Service on Gilera Runner VXR 200
How to Perform a Full Service on Gilera Runner VXR 200
Runner Vxr 200 In this video, you will see how to carry out a full maintenance service, including an oil change and oil filter replacement, transmission belt, and s…
How do you replace the motor oil of the Gilera Runner VXR 200?
How do you replace the motor oil of the Gilera Runner VXR 200?
Runner Vxr 200 In order to replace the engine oil of the Gilera Runner VXR 200, you must loosen the drain plug located on the bottom of the vehicle: once this plug …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos