Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pads on a Gilera DNA 50?

Model: Gilera Dna 50
Part: Brake pads

Video tutorial

To replace the brake pads on a Gilera DNA 50, loosen the bolts securing the brake caliper to the brake disc and disconnect the connector attached to it. Once the caliper is freed from the disc, open it by loosening the two pins that hold it closed and remove the pads inside.

These must be replaced with new replacement parts.

Once the new pads are inserted into the caliper, close it by inserting the respective pins and reconnect it to the disc with the appropriate bolts and connector.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Dna 50 Hello, today you will learn how to replace the spark plug on your Gilera DNA 50. Start by carefully removing the side fairings of the bike. Next, dis…
Dna 50 To replace the air filter on the Gilera DNA 50, loosen the screws securing the cover located on the left side of the bike, just above the gearbox. On…
Dna 50 To replace the variator on a Gilera DNA 50, open the transmission cover located near the rear wheel on the left side of the bike. Once the cover has …

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos