|
Do it yourself
| |||
| ||||
|
Model: Gilera Saturno 350
To replace the rear brake pump on a Gilera Saturno, locate the part positioned on the right side of the bike, near the side kickstarter. Once the pump is located, free it from its housing by unscrewing the fixing bolts and disconnecting the connected pipes. When the old pump is freed, it can be removed from its housing to be replaced with a new spare part. After installation, check that the rear brake functions correctly.
Updated on 13 June 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Saturno 350
To replace the water pump on a Gilera Saturno 350, loosen the screws securing the left side of the engine block to gain access to the underlying comp…
Saturno 350
The water pump installed on the Gilera Saturno 350 can be removed by loosening the screws that fix the left side of the engine block, so that it is p…
Saturno 350
The procedure for replacing the water pump on the Gilera Saturno 350 involves unscrewing the bolts that secure the seat, removing it. Next, it will b…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
