Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Flywheel and Stator from the Gilera Runner 125

Model: Gilera Runner 125
Part:

Video tutorial

In this brief and simple guide, follow the steps to remove and replace the flywheel and stator of the Gilera Runner 125 scooter. First, place the central stand and begin by removing the flywheel side cover; then use a puller to remove the flywheel with a 22 mm socket, as shown in the video.

Next, remove the stator located underneath by unscrewing the fixing screws and disconnecting the electrical wiring; finally, refit the new stator and the new flywheel, applying the reverse procedure!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Start a Gilera Runner 125
How to Start a Gilera Runner 125
Runner 125 Before you can start, position your Gilera Runner 125 on its central stand. Next, insert the key into the ignition switch and turn it fully clockwise…
How do you replace the exhaust pipe of the Gilera Runner 125?
How do you replace the exhaust pipe of the Gilera Runner 125?
Runner 125 To replace the exhaust of the Gilera Runner 125, you need to loosen the fixing screws of the supports that hold the component in place, next to the r…
How to Remove the Air Filter and Transmission on a Gilera Runner 125
How to Remove the Air Filter and Transmission on a Gilera Runner 125
Runner 125 In this video, we will go through all the instructions needed to remove the air filter box and the entire transmission system on a Gilera Runner 125 …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Engine Mount on the Harley Davidson Dyna?

This brief guide provides instructions on how to remove and replace the engine mount on the Harley Davidson Dyna. First, place your motorcycle on a stand and begin by removing the plastic cover under the engine by unscrewing the fastening screws; then unscrew the bolts of the engine mount attached to the frame, using a jack to lift the engine as shown in the video. At this point, remove and replace the engine mount with the new one, as well as the original; then reassemble everything, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos