Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Gilera Nexus 125, loosen the bolts that secure the exhaust to its housing on the right side of the bike, near the rear wheel: when the bolts are properly loosened, widen the ring that connects the exhaust tip to the collector so you can insert the new replacement part. This should be secured with the appropriate bolts to the supports, allowing it to be fixed to the exhaust collector and ensuring everything functions correctly.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Gilera Nexus 125?
How do you replace the air filter of the Gilera Nexus 125?
Nexus 125 Ie It will be possible to replace the air filter of the Gilera Nexus 125 by loosening the screws that secure the air filter box protection panel: you ca…
How to Dismantle the Variator of the Gilera Nexus 125 ie
How to Dismantle the Variator of the Gilera Nexus 125 ie
Nexus 125 Ie This guide explains how to dismantle and replace the variator of the Gilera Nexus 125 ie scooter, following the instructions below. First, place the …
How to disassemble and replace the transmission belt of the Gilera Nexus 125
How to disassemble and replace the transmission belt of the Gilera Nexus 125
Nexus 125 Ie Below we will see the instructions that will allow us to disassemble and replace the transmission belt of the Gilera Nexus 125 scooter. First of all,…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos