Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The muffler of the Harley Davidson Road Glide will need to be replaced by loosening the screws that hold it to its housing, on the right side of the motorcycle: once these screws have been loosened, it will be possible to proceed by widening the ring that is located between the manifold and the exhaust tip. The latter can thus be completely removed from its housing, in order to position the new one: the new one can now be fixed with the appropriate screws and connected to the manifold using the clamp to verify that everything works correctly.

Posted on 28 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the muffler of the Harley Davidson Road Glide?
How do you replace the muffler of the Harley Davidson Road Glide?
Road Glide To replace the exhaust pipe of the Harley Davidson Road Glide, you need to loosen the screws that hold it in place on the right side of the motorcycl…
How do you replace the muffler of the Harley Davidson Road Glide?
How do you replace the muffler of the Harley Davidson Road Glide?
Road Glide In order to replace the muffler of the Harley Davidson Road Glide, you need to unscrew the screws of the exhaust terminal supports, located on the ri…
How do you disassemble the engine of the Harley Davidson Road Glide?
How do you disassemble the engine of the Harley Davidson Road Glide?
Road Glide In order to disassemble the engine of the Harley Davidson Road Glide, you need to loosen the screws that fix the piece to its housing in the central …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos