|
Do it yourself
| |||
| ||||
|
Model: Harley Davidson Touring
In this tutorial, you will see how to change the engine oil in a Harley-Davidson Touring, a very simple and quick operation. First, wait until the engine is cool enough, then position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 15mm socket spanner. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the new filter and the bolt. At this point, simply add the necessary amount of oil through the designated upper hole.
Posted on 1 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Touring
.. You can change the engine oil of the Harley Davidson Touring by unscrewing the drain plug of the oil sump located at the central lower part of the.. …
Touring
To change the engine oil of the Harley Davidson M8 Touring, loosen the drain plug of the oil sump, which is positioned at the bottom of the vehicle: …
Touring
.. To change the engine oil on a Harley Davidson Touring, loosen the drain plug located at the bottom of the bike's oil tank. Once this is unscrewed,.. …
|
How to Dismantle the Engine of the KTM EXC 300
To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
