Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will see how to replace the battery in the remote for the Harley-Davidson Street Glide, a very simple and quick operation. You will need a small flathead screwdriver and a replacement CR2032 battery. First, locate the slot along the right edge of the remote, then insert the screwdriver tip into it, lever it open, and separate the two halves. Next, remove the old battery, insert the replacement ensuring correct polarity, and reassemble everything by following the reverse procedure.

Posted on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Street Glide .. to remove and replace the battery of the Harley Davidson Street Glide motorcycle by following these simple steps. First, remove any side bag to access.. …
Street Glide .. removing and replacing the battery on the Harley Davidson Street Glide. First, place the motorcycle on a stand and remove the rider's seat; then remove.. …
Street Glide .. replace (or repair) the fuel tank of the Harley Davidson Street Glide motorcycle. First, we put the motorcycle on a stand and begin by removing the rider's.. …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos