Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As always, it is recommended to warm up the engine for a few minutes before performing an oil change, making the circulating lubricant less viscous and facilitating its drainage. For this purpose, unscrew the upper filler cap immediately to allow air circulation. As shown in the video, unscrew the drain bolt and collect the used oil in a container. It is advised to dispose of engine lubricant properly at recycling centres. Screw the drain plug back in, measure the amount of oil drained, and refill the same amount through the upper filler hole.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Harley-Davidson Sportster 1200?
How to Change the Engine Oil in the Harley-Davidson Sportster 1200?
Sportster 1200 In this tutorial, you will see how to change the engine oil in the Harley-Davidson Sportster 1200, a very simple and quick operation to perform every…
How to Change the Engine Oil of the Harley Davidson Sportster 1200
How to Change the Engine Oil of the Harley Davidson Sportster 1200
Sportster 1200 To change the engine oil of the Harley Davidson Sportster 1200, unscrew the plug located at the central lower part of the bike to collect all the use…
How to replace the engine oil and oil filter of the Harley Davidson Sportster 1200
How to replace the engine oil and oil filter of the Harley Davidson Sportster 1200
Sportster 1200 We will briefly see the instructions for the ordinary maintenance service, replacing the engine oil and the oil filter, of the Harley Davidson Sports…

How to Access the Battery in the Benelli 180S?

In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. First, ensure that the key is not inserted, then remove the passenger seat and, using the provided keys, unscrew the two bolts securing the rider's seat. Once removed, unscrew the screws of the upper plastic bracket, disconnect both terminals starting with the negative, and extract the battery from its housing. To install a replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos