Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a Royal Enfield Hunter 350, follow these steps. Ensure the motorcycle is on a flat surface and the engine is cold. Lift the motorcycle with a centre or side stand so that the rear wheel is off the ground. Locate the oil tank cap on the left side of the engine. Remove the cap and place a collection container under the oil drain plug, usually located at the bottom of the engine. Unscrew the drain plug with a spanner and allow the old oil to completely drain into the container. Once drained, remove and replace the oil filter. Be sure to lubricate the new filter with clean engine oil before installing it. Carefully re-screw the oil drain plug. Now, fill the engine with new engine oil, pouring it slowly through the tank opening until it reaches the correct level indicated on the oil dipstick. Once the oil is added, replace the tank cap and ensure it is securely tightened, and you will have completed the replacement.

Updated on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Royal Enfield Hunter 350?
How to replace the engine oil in the Royal Enfield Hunter 350?
Hunter 350 In this tutorial we can see how to replace the engine oil in the Royal Enfield Hunter 350, an extremely simple and quick operation. First of all, mak…
How to change the engine oil in the Royal Enfield Hunter 350?
How to change the engine oil in the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Hunter 350, a very simple and quick operation. First of all, let's ma…
How to replace the engine oil in the Royal Enfield Hunter 350?
How to replace the engine oil in the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Hunter 350, a very simple and quick operation. First, let's make sure…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos