Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
We will briefly see the instructions for the ordinary maintenance service, replacing the engine oil and the oil filter, of the Harley Davidson Sportster 1200. First, we put the motorcycle on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then we proceed to unscrew the oil filter cartridge, replacing it with the new original one, as shown in the video. At this point, we unscrew the fill screw and top up with the new oil, having the specifications as indicated in the manual.

Posted on 19 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Harley Davidson Sportster 1200
How to Change the Engine Oil of the Harley Davidson Sportster 1200
Sportster 1200 To change the engine oil of the Harley Davidson Sportster 1200, unscrew the plug located at the central lower part of the bike to collect all the use…
How to Change the Engine Oil of a Harley Davidson Sportster 1200?
How to Change the Engine Oil of a Harley Davidson Sportster 1200?
Sportster 1200 To change the engine oil of the Harley Davidson Sportster 1200, you will need to loosen the drain plug located at the bottom of the oil sump: once th…
How to Change the Engine Oil in a Harley-Davidson Sportster Iron 1200?
How to Change the Engine Oil in a Harley-Davidson Sportster Iron 1200?
Sportster 1200 In this tutorial, we will see how to change the engine oil in the Harley-Davidson Sportster Iron 1200, a very simple and quick operation. First, ensu…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos