Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Basic Service on Harley Davidson Milwaukee

Model: Harley Davidson Milwaukee
Part: Checks and maintenance

Video tutorial

Warm up the engine for a few minutes to aid in the subsequent oil removal. Unscrew the drain bolt located under the engine bay and collect the used oil in a container.

Use a 17 mm socket to unscrew the oil filter and allow it to drain to clean the area where it is fitted. Remove the filter from its housing and give it an additional clean with water and solvent or a suitable spray.

Insert the new filter with a new O-ring (lubricate the O-ring before fitting, using old oil is acceptable). Remove the cover from the compartment and fill with 20W-50 lubricant through the upper hole.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Harley Davidson Milwaukee?
How to Change the Engine Oil of the Harley Davidson Milwaukee?
Milwaukee To change the engine oil on the Harley Davidson Milwaukee, unscrew the drain plug from the oil tank located in the lower central area of the vehicle.…
How do you replace the clutch on the Harley Davidson Milwaukee?
How do you replace the clutch on the Harley Davidson Milwaukee?
Milwaukee It will be possible to replace the clutch of the Harley Davidson Milwaukee by loosening the screws that secure the corresponding transmission housing…
How to change the engine oil on the Harley Davidson Milwaukee?
How to change the engine oil on the Harley Davidson Milwaukee?
Milwaukee To change the engine oil on the Harley Davidson Milwaukee, unscrew the oil drain plug located at the lower central area of the bike. Place a containe…

How to set the clock on a Yamaha V-Star 1300?

To set the clock on a Yamaha V-Star 1300, press and hold the RESET button and the SELECT button upwards, after turning on the ignition by turning the key. Once done, the hours will start to flash, allowing you to adjust them using the arrows above and below the SELECT button. When the correct hours are set, hold the RESET button, and the minutes will start to flash: these can now be adjusted in the same manner, before turning off the ignition.

Watch the video!


by ScegliAuto

More videos