Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Release the cover cap on the left fork. Unscrew the bolt located at the rear and proceed to remove the components. Then, remove the brake caliper by extracting the bolt and disconnecting it from the hoses. Repeat the same process on the right side, unscrewing the bolt and then extracting the central support bar, using a hammer if necessary. You can now remove the front tyre from its seat. For the rear tyre, remove the lower part of the exhaust and then proceed to unscrew the bolts and their respective pins. You can now also remove the rear tyre.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Harley Davidson Fat Boy
How to Replace the Battery on a Harley Davidson Fat Boy
Fat Boy In this short and simple guide, follow these steps to remove and replace the battery on a Harley Davidson Fat Boy. First, place your motorcycle on it…
How to replace the battery of the Harley Davidson Fat Boy
How to replace the battery of the Harley Davidson Fat Boy
Fat Boy Today's instructions will show us how to disassemble and replace the battery of the Harley Davidson Fat Boy motorcycle, following these simple steps.…
How to replace the battery of the Harley Davidson Fat Boy
How to replace the battery of the Harley Davidson Fat Boy
Fat Boy Following these brief instructions, we will see how to disassemble and replace the battery of the Harley Davidson Fat Boy motorcycle. First of all, p…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos