Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s briefly go over the instructions that will allow you to dismantle and replace the clutch cable on the Harley Davidson Sportster 883. First, place the motorcycle on its stand and begin removing the clutch cover; then unscrew the two adjustment screws with a socket spanner, followed by unscrewing the lock nuts to remove the cable from the adjustment, as shown in the video. At this point, remove the clutch cable along with the sheath, replacing it with the new one; finally, adjust the clutch, following the video tutorial to the end!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs on the Harley Davidson Sportster Iron 883?
How do you replace the spark plugs on the Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the spark plugs of the Harley Davidson Sportster Iron 883, you will need to disconnect the coils that are connected to the top of the engi…
How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the rear brake pads on the Harley Davidson Sportster Iron 883, loosen the screws securing the rear brake caliper, located immediately next…
How do you replace the exhaust pipe of the Harley Davidson Sportster 883?
How do you replace the exhaust pipe of the Harley Davidson Sportster 883?
Sportster Iron 883 In order to replace the muffler of the Harley Davidson Sportster 883, you need to loosen the screws that secure the exhaust terminal to its housing, …

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos