Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : Tires

Honda Accord - Tires

Tires Honda Accord (2012-2017 / mk 9)

Honda Accord (2012-2017 / MK 9)
How to reset the tire pressure light on the Honda Accord?
Resetting the tire pressure light in the Honda Accord, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must …Read all…
Posted on 13 September 2024 by ScegliAuto
Airbag (4) Speaker (2) Shocks (3) Antenna (1) Car stereo (8) Anti-roll bar (1) Battery (8) Spark plugs (7) Body (3) Key (23) Timing belt (1) Air conditioner (1) Onboard computer (4) Checks and maintenance (12) Dashboard (2) Bearing (1) Brake rotors (4) Rear bench seat (2) Headlight (10) Tail light (1) Fog lights (3) Air filter (11) Cabin air filter (18) Fuel filter (2) Diesel fuel filter (1) Oil filter (1) Parking brake (1) Grille (3) Window switch (1) Accessory kit (9) Light bulb (2) Headlight bulb (4) Tail light bulb (6) Interior dome light bulb (2) Antifreeze coolant (1) License plate light (1) Engine (1) Power window motor (3) Starter motor (3) Transmission fluid (3) Engine oil (10) Power steering fluid (1) Clock (13) Door trim panel (4) Front bumper (2) Rear bumper (4) Brake pads (2) Tires (1) Shift knob (6) Pump (4) Fuel pump (1) Car door (2) Instrument cluster (1) Wheel (1) Fuse box (22) Seat (2) Axle shaft (1) Door lock (3) Oxygen sensor (1) Side mirror (4) Warning light – error code (19) (74) Tire pressure warning light (10) Service warning light (56) Manufacturer emblem (1) Brake drums and shoes (1) Fuel cap (2) Windshield wipers (4) Valve (2) Blower motor (2) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos