Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : Windscreen wipers

Honda Accord - Windscreen wipers

Honda Accord (2002-2007 / MK 7)
Replacement of the front windshield wipers of the Honda Accord.
Today's steps will show us how to disassemble and replace the front windshield wipers of the Honda Accord, following the instructions below. First, let's move …read all…
Posted on 24 November 2023 by ScegliAuto
Honda Accord (2002-2007 / MK 7)
How to change the wiper blades in the Honda Accord?
After a certain period of time the wiper blades become too worn to perform their function properly. When we realize that the windshield does not remain …read all…
Posted on 22 June 2022 by ScegliAuto
Honda Accord (1998-2002 / MK 6)
How to replace the Honda Accord wiper motor?
In order to replace the Honda Accord wiper motor you have to remove the wiper arm, removing the plastic cap at their base and unscrewing the nut that fixes the …read all…
Posted on 16 June 2022 by ScegliAuto
Honda Accord (2008-2013 / MK 8)
How do i replace the Honda Accord wiper blades?
In order to replace the Honda Accord wiper blades, you need to lift the wiper arm, so that the wiper blades are not in direct contact with the windshield: at …read all…
Posted on 17 April 2024 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (3) Antenna (1) Car stereo (7) Anti roll bar (1) Battery (10) Spark plugs (6) Bodywork (1) Key (15) Timing belt (1) Air conditioning (1) -board computer (13) Checks and maintenance (28) Dashboard (1) Bearing (1) Brake discs (4) Rear bench seat (1) Headlight (7) Tail light (1) Fog lights (1) Air filter (10) Cabin air filter (17) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (2) Window lift switch (1) Accessory Kit (10) Light bulb (2) Headlight bulb (4) Rear light bulb (3) Interior lights ceiling light bulb (2) Antifreeze liquid (1) License plate light (1) Engine (2) Window motor (3) Starter motor (1) Gear oil (3) Engine oil (13) Power steering oil (1) Door panel (2) Front bumper (2) Rear bumper (2) Brake pads (2) Tires (18) Gear Shift Knob (3) Pump (2) Fuel pump (1) Instrument cluster (15) Wheel (1) Fuse box (10) Seat (1) Drive shaft (1) Lock (3) Lambda sensor (1) Outside rearview mirror (4) Manufacturer's coat of arms (1) Drums and shoes (1) Windscreen wipers (4) Valve (2) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos