Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Honda Accord?

Model: Honda Accord MK 8 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper blades on a Honda Accord, lift the wiper arm so that the blades are not in direct contact with the windscreen. Next, lower the fastening clip between the blade and the wiper arm. The old blade should then be pulled downwards to allow for the installation of a new one. You can perform the same operation on the other side by installing the two new blades.

After installation, check that the components are functioning correctly.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Fan on a Honda Accord
How to Replace the Radiator Fan on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you start, open the bonnet of your Honda Accord. Begin by disconnecting the hoses connected to the radiator fan, then unplug the electrical co…
How to Replace the Window Switch on a Honda Accord
How to Replace the Window Switch on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you can start, open the front door of your Honda Accord. Begin by prising out and lifting the window switch panel using a flathead screwdriver…
Where Is the Fuse Box in the Honda Accord?
Where Is the Fuse Box in the Honda Accord?
Honda Accord (1998-2002 / MK 6) The fuse box in your Honda Accord (1998-2002) is located inside the cabin, and with the guidance provided in this tutorial, you will be able to find …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos