Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : Spark plugs

Honda Accord - Spark plugs

Honda Accord (1993-1998 / MK 5)
How do you replace the Honda Accord spark plug cables?
In order to replace the Honda Accord spark plug cables, you need to open the hood, so that you can remove the plastic cover of the upper part of the engine …read all…
Posted on 3 November 2022 by ScegliAuto
Honda Accord (2008-2013 / MK 8)
How do you replace the Honda Accord spark plugs?
In order to replace the Honda Accord spark plugs you need to loosen the bolts corresponding to each coil, so that the connector connected to each of them can …read all…
Posted on 12 October 2022 by ScegliAuto
Honda Accord (2012-2017 / MK 9)
How do you replace spark plugs on a Honda Accord?
In order to replace the spark plugs on the Honda Accord, you need to open the hood and remove the plastic cover from the upper part of the engine block. Below …read all…
Posted on 24 November 2022 by ScegliAuto
Honda Accord (2012-2017 / MK 9)
How to replace the spark plugs on the Honda Accord 2.4L 16V
We see in this guide the main instructions that will allow us to remove and replace the spark plugs of the Honda Accord, with a 2.4-liter 16-valve engine. …read all…
Posted on 17 April 2024 by ScegliAuto
Honda Accord (2002-2007 / MK 7)
Spark plug replacement instructions
First of all, it is suggested to carry out this maintenance with a cold engine. Open the front hood and remove the rear plastic cover fixed with four screws; …read all…
Posted on 19 July 2023 by ScegliAuto
Honda Accord (2002-2007 / MK 7)
Replace the spark plugs on the engine
Carefully remove the plastic cover protecting the motor by unscrewing the four sealing screws. In order not to confuse the cables, disconnect only the first …read all…
Posted on 19 July 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (3) Antenna (1) Car stereo (7) Anti roll bar (1) Battery (10) Spark plugs (6) Bodywork (1) Key (15) Timing belt (1) Air conditioning (1) -board computer (13) Checks and maintenance (28) Dashboard (1) Bearing (1) Brake discs (4) Rear bench seat (1) Headlight (7) Tail light (1) Fog lights (1) Air filter (10) Cabin air filter (17) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (2) Window lift switch (1) Accessory Kit (10) Light bulb (2) Headlight bulb (4) Rear light bulb (3) Interior lights ceiling light bulb (2) Antifreeze liquid (1) License plate light (1) Engine (2) Window motor (3) Starter motor (1) Gear oil (3) Engine oil (13) Power steering oil (1) Door panel (2) Front bumper (2) Rear bumper (2) Brake pads (2) Tires (18) Gear Shift Knob (3) Pump (2) Fuel pump (1) Instrument cluster (15) Wheel (1) Fuse box (10) Seat (1) Drive shaft (1) Lock (3) Lambda sensor (1) Outside rearview mirror (4) Manufacturer's coat of arms (1) Drums and shoes (1) Windscreen wipers (4) Valve (2) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos