Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : How do you replace the Honda Accord spark plugs?

Honda Accord - Video tutorial

Model: Honda Accord MK 8 - Years 2008-2013
Part: Spark plugs
Operation: How do you replace the Honda Accord spark plugs?

In order to replace the Honda Accord spark plugs you need to loosen the bolts corresponding to each coil, so that the connector connected to each of them can be disconnected. Once the connector has been disconnected, it will be possible to extract the corresponding coil, giving access to the spark plug below. The piece can be removed using a socket wrench, replacing it with a new one. When the new spark plugs have been inserted inside their housing, it will be possible to insert the coils as well, by connecting them to the relative connectors.


Posted on 12 October 2022 by ScegliAuto



How do you replace spark plugs on a Honda Accord?
Honda Accord (2012-2017 / MK 9) In order to replace the spark plugs on the Honda Accord, you need to open the hood and remove the plastic cover from the upper part of the engine blo
How to replace the spark plugs on the Honda Accord 2.4L 16V
Honda Accord (2012-2017 / MK 9) We see in this guide the main instructions that will allow us to remove and replace the spark plugs of the Honda Accord, with a 2.4-liter 16-valve en
Spark plug replacement instructions
Honda Accord (2002-2007 / MK 7) First of all, it is suggested to carry out this maintenance with a cold engine. Open the front hood and remove the rear plastic cover fixed with four

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos