Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the spark plugs of the Honda Accord 2.4L

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Spark plugs

See other generations:
Video tutorial

The step-by-step instructions provided in this guide will allow us to disassemble and replace the spark plugs of the Honda Accord 2.4L. First, we open the hood of the car and start by removing the upper plastic engine cover; then we unscrew the coil bolts of the spark plugs, disconnecting the electrical connectors and removing them, as shown in the video.

At this point, we use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones (of the correct type and with the same thread pitch); we screw them in by hand and tighten them with the correct torque, finally installing the coils.


Posted on 13 July 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plug Leads on a Honda Accord?
How to Replace the Spark Plug Leads on a Honda Accord?
Honda Accord (1993-1998 / MK 5) To replace the spark plug leads on the Honda Accord, open the bonnet to detach the plastic cover from the top of the engine block. Once the cover is …
How to Replace the Spark Plugs on a Honda Accord 2.4L 16V
How to Replace the Spark Plugs on a Honda Accord 2.4L 16V
Honda Accord (2012-2017 / MK 9) This guide provides the main instructions for removing and replacing the spark plugs on a Honda Accord with a 2.4 litre 16-valve engine. First, open …
How to Replace the Radiator Fan on a Honda Accord
How to Replace the Radiator Fan on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you start, open the bonnet of your Honda Accord. Begin by disconnecting the hoses connected to the radiator fan, then unplug the electrical co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos