Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : Outside rearview mirror

Honda Accord - Outside rearview mirror

Honda Accord (2018-2023 / MK 10)
How to replace the Honda Accord exterior rearview mirror?
In order to replace the Honda Accord external rearview mirror, you need to detach the upper part of the door panel, so that you can disconnect the connector …read all…
Posted on 25 September 2022 by ScegliAuto
Honda Accord (2008-2013 / MK 8)
How do you replace the wing mirror on the Honda Accord?
In order to replace the external rear view mirror of the Honda Accord, it is necessary to detach the triangular cover of the internal part of the door, in …read all…
Posted on 19 November 2022 by ScegliAuto
Honda Accord (2002-2007 / MK 7)
How to replace the Honda Accord outside rearview mirror?
In order to replace the Honda Accord external rear-view mirror, remove the triangular plastic cover located on the inside of the door, in correspondence with …read all…
Posted on 3 May 2024 by ScegliAuto
Honda Accord (1998-2002 / MK 6)
How to replace the Honda Accord outside rearview mirror?
In order to replace the Honda Accord exterior rearview mirror, you must first remove the interior door panel. To do this, it is necessary to unscrew the bolts …read all…
Posted on 22 March 2024 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (3) Antenna (1) Car stereo (7) Anti roll bar (1) Battery (10) Spark plugs (6) Bodywork (1) Key (15) Timing belt (1) Air conditioning (1) -board computer (13) Checks and maintenance (28) Dashboard (1) Bearing (1) Brake discs (4) Rear bench seat (1) Headlight (7) Tail light (1) Fog lights (1) Air filter (10) Cabin air filter (17) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (2) Window lift switch (1) Accessory Kit (10) Light bulb (2) Headlight bulb (4) Rear light bulb (3) Interior lights ceiling light bulb (2) Antifreeze liquid (1) License plate light (1) Engine (2) Window motor (3) Starter motor (1) Gear oil (3) Engine oil (13) Power steering oil (1) Door panel (2) Front bumper (2) Rear bumper (2) Brake pads (2) Tires (18) Gear Shift Knob (3) Pump (2) Fuel pump (1) Instrument cluster (15) Wheel (1) Fuse box (10) Seat (1) Drive shaft (1) Lock (3) Lambda sensor (1) Outside rearview mirror (4) Manufacturer's coat of arms (1) Drums and shoes (1) Windscreen wipers (4) Valve (2) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos