Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rear-view mirror on a Honda Accord?

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Side mirror

See other generations:
Video tutorial

To replace the external rear-view mirror on a Honda Accord, remove the triangular plastic cover located on the inside of the door, corresponding to the rear-view mirror. Once the cover is removed, you can loosen the nuts that secure the mounting bolts and disconnect the connector.

When all these parts have been removed, you can pull the mirror out from the outside and remove it. The new mirror should then be positioned and connected to its connector. Finally, secure it by re-tightening the nuts that were removed earlier.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on a Honda Accord
How to Replace the External Wing Mirror on a Honda Accord
Honda Accord (2008-2013 / MK 8) To replace the external wing mirror on a Honda Accord, detach the triangular cover on the inner part of the door corresponding to the mirror. Once th…
How to Replace the External Wing Mirror on a Honda Accord?
How to Replace the External Wing Mirror on a Honda Accord?
Honda Accord (2018-2023 / MK 10) To replace the external wing mirror on a Honda Accord, first remove the upper part of the door panel to disconnect the underlying connector attached …
How to Replace the External Wing Mirror on the Honda Accord?
How to Replace the External Wing Mirror on the Honda Accord?
Honda Accord (1998-2002 / MK 6) To replace the external wing mirror on the Honda Accord, first remove the internal door panel. To do this, unscrew the bolts securing it: these are l…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos