Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Pcx 125
Part: Tires

Today's main steps will show us how to disassemble and replace the front tire of the Honda PCX 125 scooter. First, we put the scooter on the center stand and begin to unscrew the screws of the front brake caliper in order to remove it; then we unscrew the central wheel axle to remove it as well, as shown in the video. At this point, we remove the tire from the rim using tire levers, replacing it with the new one; we then reassemble the tire and front wheel, finally securing the brake caliper on the disc!

Posted on 17 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the tire of a scooter
How to replace the tire of a scooter
Pcx 125 We start removing the tire of the Honda Pcx 125 scooter by removing the exhaust bracket with a 14mm wrench, then we move on to removing the exhaust n…
How to Change the Time on the Honda PCX 125
How to Change the Time on the Honda PCX 125
Pcx 125 To manually change the time displayed on the instrument panel of your Honda PCX 125, it only takes a few seconds. Once you have placed your Honda PCX…
How to Remove the Rear Wheel of the Honda PCX 125
How to Remove the Rear Wheel of the Honda PCX 125
Pcx 125 In this video tutorial, you will learn how to remove the rear wheel of the Honda PCX 125 scooter by following the instructions below. First, place th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos