Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Pcx 125
Part: Clock

To manually change the time displayed on the instrument panel of your Honda PCX 125, it only takes a few seconds. Once you have placed your Honda PCX 125 on its stand, insert the key and turn on the ignition. Immediately press and hold both buttons located at the bottom of the panel, and release them as soon as the time starts to flash. At this point, use the same buttons to adjust the hours and minutes. Once you have set the correct time, turn off the ignition and you're done.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Pcx 125 Here are the instructions to change and set the time on the Honda PCX 125 and PCX 160 scooters. First, place your scooter on the centre stand and tur…
Pcx 125 In this video, we see how to change the time on a Honda PCX 125: we turn on the ignition by turning the key in the ignition switch, and then we press…
Pcx 125 You can modify the clock displayed on the dashboard of the Honda PCX 125 by turning the ignition key in the corresponding lock to activate the dashbo…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos