Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If the service light on the central display of your Honda CB 125F continues to remain on and you want to learn how to manually reset it, then all you have to do is read the following guide and follow the instructions. First of all, make sure to start the following procedure with the display off and locate the two buttons located on the sides of the display. At this point, hold down the button on the right and simultaneously turn on the instrument panel. Finally, wait for the service light reset to be completed and then release the button.

Posted on 31 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Honda CB 125F?
How to replace the engine oil in the Honda CB 125F?
Cb 125f In this tutorial we can see how to replace the engine oil in the Honda CB 125F, an extremely simple and quick operation, to be carried out every 12 m…
How to Replace the Spark Plugs on a Honda CB 125F
How to Replace the Spark Plugs on a Honda CB 125F
Cb 125f Today, in this brief and simple guide, learn how to remove and replace the spark plugs on the Honda CB 125F motorcycle engine by following the instru…
How to Reset the Service on the Honda CB125F?
How to Reset the Service on the Honda CB125F?
Cb 125f In this tutorial, you will see how to reset the service on the Honda CB125F, a very simple and quick operation that should only be performed after co…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos