Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 350
Part: Clock

In this tutorial, we can see how to adjust the time on the Honda CB350 RS, an extremely simple and quick operation to be carried out, for example, after disconnecting the battery or following the switch to daylight saving time. First of all, insert the key, then turn on the instrument panel and hold down both buttons located on the left side of the dashboard until the screen starts flashing. Next, press the lower button, adjust the hour with the upper button, move on to the minutes again with the lower button, and, in the same way, adjust them before saving the setting.

Posted on 25 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Honda CB350
How to Set the Time on the Honda CB350
Cb 350 In this tutorial, you will see how to set the time on the Honda CB350, a very simple and quick operation to perform, for example, after disconnecting…
How to adjust the time on the Honda CB350?
How to adjust the time on the Honda CB350?
Cb 350 In this tutorial, we will see how to adjust the time on the Honda CB350, a very simple and quick operation that can be done, for example, as a troubl…
How to adjust the time on the Honda CB350?
How to adjust the time on the Honda CB350?
Cb 350 In this tutorial we can see how to adjust the time on the Honda CB350, an extremely simple and quick operation, to be carried out for example after d…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos