Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 750
Part: Engine

In order to disassemble the Honda CB 750 engine, you need to loosen the screws that secure the block to its housing: once these screws have been loosened, you will need to proceed by removing the intake and exhaust manifolds and then also removing the sensor connectors. At this point, you will need to remove the cylinder head and the cylinders, accessing the pistons inside them: these can be detached from the connecting rods, which in turn must be detached from the crankshaft. This way, you will be able to access all the internal components and verify that everything is functioning properly.

Posted on 2 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Honda CB 750
How to Replace the Engine Oil and Oil Filter of the Honda CB 750
Cb 750 The process of replacing the engine oil and oil filter takes only a few minutes; let's see how to perform the routine maintenance service on the Hond…
How to Change the Engine Oil and Oil Filter on a Honda CB 750
How to Change the Engine Oil and Oil Filter on a Honda CB 750
Cb 750 Let's go through the procedure for performing the routine maintenance service by changing the engine oil and oil filter on the Honda CB 750. First, p…
Resetting the Service Light on a Honda CB 750
Resetting the Service Light on a Honda CB 750
Cb 750 Follow the procedure outlined in this guide to reset the service light for the regular maintenance oil change on the Honda CB 750. First, place the m…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos