Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Honda
  4. : Crf 1000l

How to Replace the Air Filter on a Honda Africa Twin 2016

Model: Honda Crf 1000l
Part: Air filter

Video tutorial

Are you planning to replace your bike's air filter? Good, let's do it together in this short guide. Get the replacement filters.

Use a spanner to unscrew the screw above at the height of the handlebars and one below at the height of the cylinders, finally one behind the windscreen. There are three plastic rivets to release by pressing them inwards, on the internal intake above the wheel.

Also, detach the grille under the headlight. We are ready to remove the side plastic.

Four screws and we can take off the filter cover, I recommend cleaning it. Finally, unscrew the two screws holding the filter in place and replace it with the new one. We can start to refit everything. Before refitting the grille under the headlight, we will replace the filter on the other side.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Africa Twin To replace the air filter on the Honda Africa Twin, loosen the screws securing the protective fairings on the left side of the bike, near the fuel ta…
Africa Twin To replace the air filter on the Honda Africa Twin, loosen the bolts securing the right side fairing at the front of the bike, just below the fuel ta…
Africa Twin To replace the exhaust on the Honda Africa Twin, loosen the screws that secure it to its housing on the right side of the bike, near the rear wheel: …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Exhaust on a GasGas SM 700?

On the GasGas SM 700, the procedure for replacing the exhaust can be carried out by loosening the screws that secure the right side panel of the corresponding mudguard: once this panel has been completely removed, you will find the exhaust, which can be freed from its seat by loosening the support screws and disconnecting the ring that connects the exhaust to its exhaust manifold. Once the old exhaust has been removed, you can insert the new one into its housing, securing it to the manifold and the side supports.

Watch the video!


by ScegliAuto

More videos