Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Gear Indicator Light on a Honda PCX 125

Model: Honda Pcx 125
Part: Service warning light

Video tutorial

Let’s see how to reset the service light on a Honda PCX 125: turn on the ignition and locate the two buttons on the instrument panel. Press and hold both buttons on the side of the display simultaneously for a few seconds.

When the maintenance menu appears, you can release the buttons; you should see the message "oil" or "oil change". Use the buttons to scroll to the message: the display will show the standard interval of 6,000 km. Hold down the select button until you see the counter reset; the light should turn off. Exit the menu, turn off, and turn on the ignition again for confirmation.


Posted on 28 April 2026 by ScegliAuto


Related tutorials

Oil change reset on a Honda Pcx 125
Oil change reset on a Honda Pcx 125
Pcx 125 Today we will see how to reset the oil change indicator light on a Honda PCX 125, model produced from 2021 onwards. Let's start by turning on the veh…
How to Reset the Service Light on a Honda PCX 125
How to Reset the Service Light on a Honda PCX 125
Pcx 125 In this brief guide, you will reset the maintenance light for the oil change on the Honda PCX 125 scooter. First, place your scooter on the centre st…
How to reset the Service light on the Honda PCX 125?
How to reset the Service light on the Honda PCX 125?
Pcx 125 To reset the Service light on the Honda PCX 125, press and hold the button located on the right side of the instrument panel while it is off. Continu…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos