Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Pcx 125
    4. : How to reset the service light on the Honda PCX 125.

Model: Honda Pcx 125
Part: Checks and maintenance
How to reset the service light on the Honda PCX 125.

In this short guide, we will reset the maintenance light for the oil change of the Honda PCX 125 scooter. First, we put our scooter on the center stand and start pressing and holding the button located on the instrument panel. Then, we turn on the instrument panel and wait for the service light that appears on the display to completely turn off, as shown in the video. Now we can release the button and turn off the instrument panel. Then, we turn on the instrument panel and the engine, verifying that the engine oil light has actually been reset!


Posted on 10 May 2023 by ScegliAuto



How to reset the oil service on the Honda PCX 125 scooter?
Pcx 125 As we can see in this tutorial, resetting the oil service on the Honda PCX 125 scooter is an extremely simple and quick operation. Before proceeding,
How to reset the service on the Honda PCX 125 scooter?
Pcx 125 In this tutorial, we can see how to reset the service on the Honda PCX 125 scooter, an extremely simple and fast operation, to be performed only once
How to change the time on the Honda PCX 125?
Pcx 125 To manually change the displayed time on the instrument panel of your Honda PCX 125, it only takes a few seconds. Once you have placed your Honda PCX

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos