Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Maintain the Air Filter on the Honda Forza 300

Model: Honda Forza 300
Part: Air filter

Video tutorial

Learn how to maintain the air filter and the crankcase breather on your Honda Forza 300: the filter should be replaced every 12,000 miles, while the crankcase breather should be cleaned every 4,000 miles. To access the air filter, open the seat and remove the carpet and the internal cover.

You will find three hex bolts securing the cover of the compartment. Remove the airbox cover; underneath is the filter, replace it after cleaning the compartment of dust and debris.

To clean the breather, locate the vent cap, ensure there is no oil inside, clean it with soap and water, and then refit it in place. Close the airbox and then secure the compartment with its seven screws.


Posted on 9 May 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Honda Forza 300?
How do you replace the air filter of the Honda Forza 300?
Forza 300 It will be possible to replace the air filter of the Honda Forza 300 by loosening the screws that secure the cover of the filter box, located near th…
How to Replace the Air Filter on a Honda Forza 300
How to Replace the Air Filter on a Honda Forza 300
Forza 300 To replace the air filter on the Honda Forza 300, loosen the screws securing the cover of the casing located above the rear wheel, just above the tra…
How to Replace the Transmission on a Honda Forza 300?
How to Replace the Transmission on a Honda Forza 300?
Forza 300 To replace the transmission on a Honda Forza 300, you need to loosen the screws that secure the cover of the casing: once this panel has been removed…

How to remove the front wheel of the KTM Super Adventure 1290

In this video tutorial, you will learn how to remove and replace the front wheel of the KTM Super Adventure 1290 motorcycle, following the instructions provided below. First, place your motorcycle on the centre stand and begin to unscrew the fixing bolts of the front brake calipers; once removed, unscrew the central axle of the wheel to remove it from its hub, as shown in the video. At this point, if necessary, replace the tyre and refit the front wheel; finally, reinstall the brake calipers, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos