Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, see how to change the engine oil in the Honda Rebel 1100, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then position a container under the bike, locate the drain hole bolt, and unscrew it using a 12mm socket. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the new filter and the bolt. Now, simply pour the required amount of oil through the designated upper hole.

Posted on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Rebel 1100 Before you can start, position your Honda Rebel 1100 on its side stand. Begin by placing a container underneath the oil sump. Next, unscrew and remov…
Rebel 1100 In this tutorial, see how to set the time on a Honda Rebel 1100, a very simple and quick operation to perform, for example, after disconnecting the b…
Rebel 1100 To replace the clutch on the Honda Rebel 1100, loosen all the bolts securing the cover on the right side of the bike. Once the bolts are loosened, th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos