Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlight bulb on a Honda CB 300F, an extremely simple and quick operation. First, ensure that the instrument panel is off for safety. Then locate the three screws on both sides of the headlight and unscrew them using a 5mm hex key. Next, remove the indicated plastic rivets, separate the headlight from the frame, and disconnect the power connector. At this point, remove the rubber cap, unclip the metal clip, replace the bulb, and reassemble everything following the reverse procedure.

Posted on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Honda CB 300F
How to Replace the Clutch on the Honda CB 300F
Cb 300f In this guide, we will cover the main instructions on how to dismantle and replace the clutch on the Honda CB 300F motorcycle. First, place the motor…
How to Change the Engine Oil in the Honda CB300F?
How to Change the Engine Oil in the Honda CB300F?
Cb 300f In this tutorial, you will see how to change the engine oil in the Honda CB300F, a very simple and quick operation. First, ensure that the engine is …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos