Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Side Fairing on the Honda CBR 1000RR?

Model: Honda Cbr 1000rr
Part:

Video tutorial

In this tutorial, we will see how to remove the side fairing on the Honda CBR 1000RR, a very simple and quick operation. First, stand in front of the fairing in question, then locate the two bolts along the lower edge and unscrew them using an Allen key. Next, unscrew the central bolt, remove all the indicated plastic rivets, and carefully separate the fairing from the frame.

At this point, simply repeat the operation for the opposite side, if necessary, and fit any replacement parts following the reverse procedure.


Posted on 29 July 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Honda CBR 1000RR?
How to replace the engine oil in the Honda CBR 1000RR?
Cbr 1000rr In this tutorial, we can see how to replace the engine oil in the Honda CBR 1000RR, an extremely simple and quick operation. First of all, make sure …
How to Change the Engine Oil in a Honda CBR 1000RR
How to Change the Engine Oil in a Honda CBR 1000RR
Cbr 1000rr In this tutorial, see how to change the engine oil in a Honda CBR 1000RR, a very simple and quick operation. First, ensure the engine is sufficiently…
How to Replace the Rear Wheel of the Honda CBR 1000RR
How to Replace the Rear Wheel of the Honda CBR 1000RR
Cbr 1000rr Follow this guide for instructions on how to remove and replace the rear wheel of the Honda CBR 1000RR using these simple steps. First, place your mo…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos