Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulbs on the Honda SH 300

Model: Honda Sh 300
Part: Light bulb

Today, we will see the instructions that will allow you to remove and replace the indicator bulbs of the front headlight on the Honda SH 300 scooter. First, place the scooter on the centre stand and start by unscrewing the two fixing screws located above the front fairing to remove it. Now, you will be able to disconnect the indicator bulb holder, replacing the bulb with a new one (of the correct type and with the same fitting), as illustrated in the video. At this point, replace the other front headlight bulbs if necessary, and finally reassemble the front plastic cover.

Posted on 7 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on the Honda SH 300
How to Manually Set the Time on the Honda SH 300
Sh 300 If you want to manually change the time displayed on the instrument panel of your Honda SH 300, simply read the following guide carefully and put int…
Where is the battery located on a Honda SH 300?
Where is the battery located on a Honda SH 300?
Sh 300 The battery of your Honda SH 300 powers the scooter's electrical system, including the starter motor when you need to start the engine. The battery i…
How to Replace the Spark Plugs in the Honda SH 300
How to Replace the Spark Plugs in the Honda SH 300
Sh 300 In today's video, we will see how to replace the spark plugs in the Honda SH 300. Always proceed with the engine cold. Remove the maintenance cover a…

How to Replace the Air Filter on a Yamaha Virago 1100

In this tutorial, you will see how to replace the air filter on a Yamaha Virago 1100, a very simple and quick operation. First, position yourself on the right side of the bike, then locate the filter box and unscrew the securing screws using both an Allen key and a socket wrench. Next, separate the box from the support, unscrew the additional rear screws, and open it. At this point, you can remove the old filter, clean any dirt residue present, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos