Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Piston on a Peugeot Speedfight 2

Model: Peugeot Speedfight 2
Part: Engine

Video tutorial

To replace the piston on a Peugeot Speedfight 2, loosen the bolts that secure the seat and the corresponding protective panel in the under-seat compartment at the front: once this panel is removed, you can locate the top of the engine block, where the cylinder will be found.

This needs to be appropriately removed by unscrewing the fixing bolts and disconnecting the relevant coil and spark plug.

The underlying piston can then be freed from the connecting rod by removing the retaining ring and the appropriate pin; this will allow you to insert the new piston and reassemble all previously removed components.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Piston on a Peugeot Speedfight 2?
How to Replace the Piston on a Peugeot Speedfight 2?
Speedfight 2 To replace the piston on a Peugeot Speedfight 2, loosen the bolts securing the engine block in its housing. Disconnect the relevant connectors for th…
How to Replace the Crankshaft on the Peugeot Speedfight 2?
How to Replace the Crankshaft on the Peugeot Speedfight 2?
Speedfight 2 To replace the crankshaft on the Peugeot Speedfight 2, loosen the bolts securing the engine block to its housing, disconnecting all connectors and ho…
How to Remove the Engine from the Peugeot Speedfight 2?
How to Remove the Engine from the Peugeot Speedfight 2?
Speedfight 2 To remove the engine from the Peugeot Speedfight 2, loosen the bolts securing it to its housing, disconnect the intake and exhaust pipes, and unplug …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos