Do it yourself
Frequently asked questions about cars and motorcycles

Model: Lml Star
Part: Starter motor

In order to replace the starter motor of the LML Star, you need to loosen the screws that secure the panel located immediately behind the footrest compartment, right at the base of the under-seat compartment. Once this panel has been removed, you can proceed by locating the starter motor near the engine block. By loosening the screws that secure it to its housing and disconnecting the power cables, you can remove the old starter motor from its seat. The new one can then be inserted to ensure that everything works properly.

Posted on 14 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Star To replace the starter motor on an LML Star, remove the right side panel of the bike, located near the seat. Under this panel, you will find the star…
Star To replace the knobs on the LML Star, remove the old ones by prising them off from the base, as there is a screw at the end that may break. Heat the …
Star In order to replace the clutch of the LML Star, you need to loosen the casing located near the rear wheel: once the screws are removed, you can detac…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos